Heatrex 234 Series

234 Series Washdown/Corrosion Resistant Unit Heater

The Heatrex 234 Series unit heater is the perfect solution to the problem of heating people or equipment in non-hazardous environments where moisture and corrosion exist. Advantages include :

  • Built-in Controls :All necessary safety and temperature controls are included in a single package. Components and motor are factory-wired to a single terminal block for field wiring, eliminating the chance for field error and reducing installation costs.
  • Single Point Electrical Hook-up : Heater, fan motor and controls are all connected to the same branch circuit.
  • Corrosion Resistant : Stainless steel construction, epoxy-coated aluminum fan blade and nonmetallic NEMA 4X terminal enclosure resist corrosion found in sewage treatment plants, swimming pools, car washes, paper mills and marine installations.
  • Washable : This watertight construction can be hosed down without disconnecting the heater, which makes it ideal for coal handling areas, steel mills, foundries, ships, wood finishing plants, cement, sand, grain and food processing facilities.

For more information click here.

233 Series Explosion-Proof Unit Heater

Heatrex 233 Series Explosion-Proof Unit Heater

Heatrex’s 233 Series EXP explosion-proof unit heater is designed with both safety and versatility in mind. Unique 233 Series features include:

  • Industry’s Lowest Ignition Temperature Code Rating : T3C, 320°F (160°C)
  • Dual Over temperature Protection: With both automatic and manual reset over temperature cutouts for additional safety.
  • Nontoxic Propylene Glycol Heat Transfer Fluid
  • Low 70 PSIG Relief Valve Setting: This assures that in an emergency, the initial escaping vapor temperature remains below the 320°F (160°C) ignition temperature.
  • Corrosive Resistant Options: Heatrex offers three constructions suitable for most applications. Standard construction for use in dry non-corrosive areas includes : Welded steel heat exchanger; powder-coated cabinet; epoxy-coated motor. A 316 stainless steel construction suitable for Wastewater Treatment Plants includes : 316 stainless steel heat exchanger, headers and tubes with aluminum fins; stainless steel cabinet; corrosive resistance hardware; epoxy-coated motor. Third construction is suitable for use in Chemical Plants where chlorides are present and includes : Heresite® coated heat exchanger, cabinet, fan blade; corrosion resistance hardware; epoxy-coated motor.

For more information click here.

Impedance Heating

Product Overview: HX-881-Series, Impedance Heating System

An Impedance Heating System is a unique, safe and proven method for electric pipeline tracing and heating. The pipe actually becomes the heating element when low AC voltage is applied to it by a special, custom designed transformer.

Heatrex can provide single source responsibility for design, hardware and start-up assistance for an Impedance Heating System to heat gasses or fluids flowing through your pipeline. It can also be used over a wide range of temperatures to prevent freezing in cold weather, maintain fluidity of viscous materials, raise the temperature of heat sensitive materials or maintain gas temperatures up to 1600°F.

Benefits of Impedance Heating

  • Low Voltage Operation – All systems operate at less than 30 Volts, many at 10 Volts or below. Heatrex systems meet or exceed the requirements of the National Electrical Code (Article 427), assuring safe operation.
  • Uniform Heating – Because the entire pipe effectively acts as the heating element, heat is generated uniformly throughout its entire length and circumference without hot spots.
  • Simplicity – The impedance method takes the complexity out of pipeline heating. A few basic components comprise the entire heating system. Installation is simple; it can be installed without disturbing most of the existing thermal insulation.
  • Wide Temperature Range – Heatrex has pioneered the use of impedance heating for applications ranging from below freezing to 1600°F. It is often the only viable option for high temperature pipeline heating.
  • Close Control – Thermocouple sensors placed along the pipeline provide precise, uniform temperature control. Optional SCR controls give the ability to achieve control within ± 1°F.
  • Low Cost – Installation costs are kept to a minimum by the inherent simplicity of the system. Likewise, maintenance is virtually eliminated; many systems operate unattended. Energy costs are low because the required energy is concentrated in the pipe and efficiently heats the fluid or gas traveling through it.
  • No Burnouts – When the pipe becomes the heating element, burnouts and failures associated with electrical resistance tapes and cables are eliminated.

Advantages Over Conventional Methods

  • No External Fluids – Pipeline heating with steam or high temperature fluids introduces a high degree of complexity and a potential hazard. Impedance heating accomplishes the same result in a simple, straightforward manner.
  • No Leaky Jackets – With impedance heating, you won’t have leaky steam lines, cracked steam traps, pump failures or frozen return pipes.
  • No Hot Spots – Impedance heating eliminates the danger of overheating temperature-sensitive materials (asphalt, chocolate, heavy syrups) because hot spots associated with conventional pipe tracing are eliminated.
  • No Routine Maintenance – Routine maintenance is eliminated, along with the replacement parts and production shutdowns associated with such maintenance.

Talk to Heatrex representative here to get more information on Impedance Heating Solutions.

room

Component Heaters for Skid-Mounted Process Heating Systems

The Challenge

  • A global skid-process system manufacturer that works in the power gen, oil & gas, nuclear, and industrial sectors was challenged to design skid-mounted processing equipment for a major energy company. The energy company needed a modular system that would increase the efficiency of their turbines for a series of oil & gas applications. The modular system needed to heat and circulate lubrication oil used to lubricate the turbines. The quality of the heater was of utmost importance, as maintaining the oil at a precise temperature in the holding reservoir is paramount in ensuring the system consistently ran effectively. The customer needed a solution that perfectly balanced durability, ease of maintenance, and customization to specs.

Component Heaters for Skid-Mounted Process Heating Systems

The Solution

  • Heatrex’s reputation for quality has earned it a place on many preferred supplier lists, including being a GE approved Supplier.  In addition to producing premium quality products, Heatrex was awarded the contract to manufacture 16 immersion heaters due to its competitive price and short lead times. The Heatrex engineering team designed a flanged immersion heater that was ready to “plug in” to the modular system upon arrival, not only making installation smoother, but guaranteeing ease of maintenance.

Component Heaters for Skid-Mounted Process Heating Systems

The Benefits

  • Heatrex’s customized immersion heaters enabled the process system manufacturer to successfully deliver the optimal skid mounted process system for its customer. The skid manufacturing company was so impressed with these immersion heaters, they recognized Heatrex, in an ISO audit (International Organization for Standardization), as a supplier with unprecedented customer focus that consistently meets the sourcing requirements on quality and price, upholds the highest standards of delivery quality, and demonstrates the highest levels of flexibility and responsiveness.

 

Heatrex played an integral role in delivering the necessary quality, and continues to work closely with the manufacturer to exceed the energy company’s high expectations.

Customer Testimonial

“We have been very happy with the Heatrex heating elements, especially on lead times and pricing. The competitors can’t compare on those aspects.”

Global Process System Manufacturer

 

ih0914-hcrmc-fig4-615

Selecting an Appropriate Heat-Resistant Alloy

Temperature limit is the first factor when choosing a heat-resistant alloy for a certain application. However, there are many more factors to consider for your application to succeed and to keep employees safe. An article from Industrialheating.com by Marc Glasser will give some good insight on heat-resistant alloy.

Oxidation

The first and foremost variable to consider is the oxidation limit of a particular alloy. A continuous layer of chromium oxide on the surface of austenitic alloys is responsible for promoting oxidation resistance. Silicon and aluminum, at high enough levels in an alloy, will allow the formation of subscales of silica or alumina, which will further enhance oxidation resistance. Finally, the addition of rare-earth and other heavy metals will add another level of oxidation resistance by adding an oxide that will bond to the other oxides to create a tighter, thinner, more adherent oxide that is harder to break. A thinner oxide scale is less prone to crack and spall than a thicker oxide.

Exposure to Other Atmospheres

In the heat-treating world, materials of construction can be exposed to other atmospheres, including carburizing, nitriding (and combinations of these two), vacuum, hydrogen, inert gas and more. In vacuum, and to a large extent inert-gas atmosphere, oxidation resistance is less important because the purpose of these atmospheres is to create an oxygen-free atmosphere. It should also be understood that products of combustion contain both carbon and nitrogen at high temperatures, which can lead to nitriding and carburizing. In commercial heat treating, carburizing and carbonitriding are generally performed in the temperature range of 1600-1750°F (871-954°C), while nitriding and ferritic nitrocarburizing are generally performed at 985-1050°F (530-565°C).

Creep and Rupture Strength

Tensile strength can no longer be used as a design parameter above 1000°F (538°C). Instead, two very important factors in deciding on a heat-resistant alloy are the ability of the alloy to resist sagging and breakage with an applied load at temperature. These two parameters are known as high temperature creep and rupture resistance, respectively. Simply stated, creep is the phenomenon of metal stretching from its own weight or from an applied load at an elevated temperature.

Embrittlement

High-chromium, low-nickel materials (stainless steels) change from ductile to brittle after anywhere from a few hundred to several thousand hours of service in the 1100-1600°F (593-871°C) range. This is due to the precipitation of a hard, brittle inter-metallic phase known as sigma phase. While sigma phase may not be harmful when the material is at temperature, it can completely embrittle the alloy at room temperature.

Thermal Cycling/Expansion

Thermal fatigue as it relates to heat-resistant alloys is cracking that occurs after repeated heating and cooling (quenching) of an alloy. Heat-resistant alloys have high coefficients of thermal expansion and low thermal conductivity. Simply stated, the metal surface heats and cools before the center does. During heating, the surface is expanding quicker than the center, which places strain on the center. Then during quenching, the surface is contracting faster than the center, placing more strain on the surface.

Please read more here.

If you like to speak with a Heatrex rep today about heating system perfect for your application visit us now!